The Phoros-3 spots the heat of suspects and objects intotal darkness, specially designed for the rigors of law enforcement. Combinedwith a sensor resolution of 384×288 pixels, It has aparticularly high thermal resolution of <40mK and thus delivers even in poorenvironmental conditions still high-contrast images. Multifunctional andflexible in use. Hand-held or helmet-mounted device for easy detection andidentification. Additionally, due to the nature of thermal imaging, it allowsyou to see through smoke, fog, and light foliage.
Super thin and small
Easy installation on helmet
50HZ refresh rate
IP68 protection level
- Pixel size12 μm
- Objective lens7.5mm/F1.0
- Display typeOLED
- Display resolution1024×768
- Optical magnification2X/4X
- FOV29° x22°
- Recognition range177m
- Operation timenot less than 3hrs
- Battery type1XCR123
- FunctionGain adjustment, polarity conversion, video output, external power supply
- Indicator lightLed light, infrared supplementary light, SOS light
- Operation temperature—40℃～+60℃
- Storage temperature—50℃～+70℃
- Degree of protectionIP67
- Weight without batteries140g (aluminum alloy) /110g(magnesium alloy)
The smallest thermal goggles in the world.
The Pharos 3 spots the heat of suspects and objects in total darkness,specially
designed for the rigors of law enforcement.
1 2 3 4 Control button for light and thermal imaging functions
5 Lens 10 White light (160 Lumen)
6 Video out/USB 11 IR (reliably invisible 940 nm)
7 Watertight battery compartment 12 Red light (15 Lumen)
8 Lens cover
9 Turnover mount
While using the lamp mode with the thermal imaging sensor turned off, the power consumption is mostly depending on the brightness-level.
The three LEDs (white, red, IR) can be adjusted in brightness in 10 steps and have a luminous flux of up to 1 60 ANSI-lumen (booster mode white).
When the Pharos 3 folded down and the lens the flap is opened, it becomes thermal imaging monocular, which has a very high thermal resolution of up to < 40 mK. This almost corresponds to the performance of large cooled thermal imaging devices and makes orientation possible even in indoor areas and low- dynamic environments. This is also due to the large viewing angle of 24°.
The lamp mode can also be used simultaneously with the thermal mode. Only the booster mode is not possible in this combination.
- Each color with flashing function
- SOS function
- IFF encodings (government version)
Super thin and small
With the 42mm length and a weight of 140g (magnesium alloy), the Pharos 3 can be concealed in a pocket or mounted to a helmet, while adding minimal weight to ofﬁcers' heavy gear.
Excellent image clarity
Based on the 320x240 12-micron technology, the Pharos 3 creates excellent image clarity and provide better detection and classiﬁcation, day or night.
Easy to use
The Pharos 3 can be attached to both the helmet and the headband. So both hands are always free. Its performance is in no way inferior to that of larger hand-held systems.
The Pharos 3 offers multiple palettes for different
personal preferences, environments, and situations.